Single,Channel,Process,Controllers,Temperature,Displays

Single-Channel Process Controllers and Temperature Displays


1550 Kingston Rd. #1116
Pickering, ON
L1V 6W9
TEL: 1 800 809 7167 CDA/USA
Instronics
Manufacturers
Instrumentation
Load Cells/Transducers
Magnetic Sensors
Pressure Sensors
Torquemeter/Torque Sensor
Ultrasonic Sensors
Vibration/Shock Monitors
Single-Channel Process Controllers and Temperature Displays
3820/30 Process Meter and Process Meter with Totalizer
3320N4 3-1/2 / 4-1/2 Digit 4-20mA Indicator with Relay Output Options
3330/60 T/C and RTD Indicator with Relay Output Options
3200 Universal Input Digital Panel Meter
3400 Process Meter and Process Meter with Totalizer
3600 3/64 DIN Slim Temperature Meter Pressure Controller and Strain Gauge Meter
2800 3-1/2, 4 and 4-1/2 Digit Resolution Digital Panel Meter
3100 Explorer Series with Relay and Analog Outputs

3820/30 Series
Process Meter and Process Meter with Totalizer



The models 3820 Process Meter and 3830 Process Meter with Totalizer offer many features and performance capabilities to suit a wide range of industrial applications.

The 3820 and 3830 are available in the ranges of 4-20mA, 0-10 VDC, or 0-5VDC. An optional 10 VDC and 24 VDC excitation is available for these models. These units include a 12 point linearization capability for compensation of nonlinear processes.

The 3820 and 3830 provide two programmable, (PEAK, VAL), reading memory.

The 3830 Totalizer can be used to compute a time-input product. This can be used to provide readout in totalized flow, batch or weighing operations.

The units can have up to 4 setpoint alarms assignable to Rate, Totalizer (3830), or both Rate and Totalizer.

Four front keys are easily programmed for special functions allowing quick access to alarms, view Peaks, reset totals or switch scaling from gallons to barrels.

1/8 DIN extruded aluminum case
Continuous update of an internal memory stores the highest and lowest measurement (P1, P2) values since they were reset
Totalizer has a Scientific Notation mode that allows totals to over 1 billion
Selectable update rate of .1, 2, 10, 20/sec
NEMA 4X (IP65) Front Panel
Four programmable alarm setpoints, up to 4 relay
outputs
Available in ranges of 0-20mA, 0-10VDC, 0-5 VDC
Easily scaled into Engineering units
Four programmable function keys
Low flow cut off
Square Root, Flume, Weir readings
Alternating Relay
Square Root Extractions

Back to top


3320N4 Series
3-1/2 / 4-1/2 Digit 4-20mA Indicator with Relay Output Options



The 3320 low cost display is designed for industrial and laboratory measurement. The unit comes standard with a NEMA 4X front cover and
a rugged anodized aluminum case that is well-suited for process environments.

The meter readout is a ±1,999 count LED display. A 12-bit A/D provides excellent stability. This meter can measure all the common transducer outputs (4-20 mA, 0-5 VDC, 0-10 VDC).

The 3320 also supplies excitation power to drive process instruments at
10 VDC @ 120 mA or 24 VDC @ 50 mA.

The 3320 has a bright and long lasting 0.56" high red LED display. Screw terminal connectors on this unit simplify wiring and installation.
A 4½-Digit model, 3324, is also available.

NEMA 4X (IP65) Front Panel
1/8 DIN Extruded Aluminum Case
Selectable Excitation
(10 VDC@120 mA), (24 VDC @ 50 mA)
2 Optional Alarms, Normally Open Relay
Screw Terminal Connectors

Back to top


3330/60 Series
T/C and RTD Indicator with Relay Output Options



The 3330 thermocouple display offers a low cost solution for indicating and/or controlling temperature from a type "J" or "K" thermocouple. The unit is available in 1° (3330) or 0.1° (3332) temperature resolution. Temperature ranges for a type "J" thermocouple is -148° to 1,292°F (-100° to 700°C). Temperature ranges for the type "K" thermocouple is -148° to 1999°F, (-100° to +1200°C).

The 3360 RTD display indicates and/or controls temperature from a 2 or 3 wire 100 platinum (0.00385 Alpha) sensor. The temperature range is
-148° to +1472°F (-100° to +800°C). The unit has an excitation of 1 mA max. which eliminates heating effects.

The display has a bright 0.56" high red LED display housed in a NEMA 4X front case. The indicator flashes all digits if the thermocouple opens or the wire becomes faulty.

NEMA 4X (IP65) Front Panel
1/8 DIN Extruded Aluminum Case
Low Cost
Short Depth Case (2½")

Back to top


3200 Series
Universal Input Digital Panel Meter




Standard Features

5-Digit, -19999 to +20999 red LED display
Display can be user programmed for 3½, 4 or
4½ digits, 0.56" LED Display
Microprocessor controlled A/D
Four front panel annunciators to display alarm status or status indicators for selectable functions
Universally powered from 100-132 VAC,
200-264 VAC and 10-40 VDC
No calculation setup for scaling and offsetting. Simply enter input and display high and low values
Four Display Format Selections
Selection for upper and lower limits that when
exceeded will cause display to flash
Programmable A/D functions
User configurable nonlinear 17-point correction
User programmable front keys and external input assignments
Programmable alarm functions

Back to top


3400 Series
Process Meter and Process Meter with Totalizer



The 3400 series digital panel meter displays are considerably larger, brighter and therefore more visible than displays for conventional instruments with the same DIN size. The 3400 has a standard warranty period of 3 years. The meter is user–friendly in programming with two options in scaling the meter into engineering units. The first method is a simple data entry of two points and the corresponding display values. The second method is accomplished by simply applying a signal to the input and entering the display value equal to the input signal. The Process, Thermocouple, and RTD models offer an optional output of 2 SPDT relays rated for 8A @ 250VAC. The display on the 3400 updates at a rate of 4/sec.

High Visibility 3½ DIGIT LED Display
Clamp Wago Connectors
Front panel programmable decimal points
Two scaling methods (by front keyboard or actual load calibration)
Optional two relay output (3420, 3430 & 3460 only)
Available in 7 different input models: VDC, ADC, VAC, AAC, PROCESS, RTD, THERMOCOUPLE
Short Depth behind the panel (2.4")
Available in models powered by 115/230VAC, 12VDC,
and 24VDC

Back to top


3600 Series
3/64 DIN Slim Temperature Meter Pressure Controller and Strain Gauge Meter




The 3600 series is a 3/64 DIN universal meter. It offers a standard two alarm relay output, digital filtering and has a 5/sec display update rate. There is also menu selection of J, K, T, R and S thermocouples or Pt100, Ni100 RTD's, 0.1 degree resolution, C or F. It has front panel adjustable zero and span and automatic fixed cold junction.

3/64 DIN Case
0.94" x 2.83" x 4.92" (24 x 72 x 125 mm)
-1999 to 9999 Digit, 0.56" LED Display
IP65/NEMA 4X Front Panel
Tare
Two Alarm Relay Outputs
85-264 VAC Powered
Excitation Supplies
5/Sec Display Update Rate
Options: Analog Output, RS232 & Infrared Remote Setup

Back to top


2800 Series
3-1/2, 4 and 4-1/2 Digit Resolution Digital Panel Meter




Standard Features

Fully prompted setup and data entry through front panel keypad
Automatic storage of max/min measurement data
Dual high/low setpoints with user-programmable
hysteresis
SelfCal™ insures accuracy by sampling a precision internal reference every four seconds
Setup data permanently stored in nonvolatile memory
Lockout code for added security
High-intensity 0.5" blue-green vacuum fluorescent display
NEMA 12 sealed front panel
Compact 1/8 DIN case, 45mm x 92mm cutout
Input/Output connectors supplied
Dimensions: 2"H x 3.83"W x 5.36"D
(50.8 x 97.3 x 136.1mm)

Back to top


3100 Series
Explorer Series with Relay and Analog Outputs



Standard Features

Bright and long lasting LED display, 0.56" LED
2 Relay Outputs
4-20mA or 0-10V analog output (user selection)
Drip-proof front and is dust tight. Optional NEMA 4X (IP65) cover available
Compact 1/8 DIN case, 45 x 92mm cutout
Complete with plug in screw terminal connectors that accept wire up to 14 AWG. for all connections
Wide range of engineering units
Slot on inside of front panel for displaying unit of measure from furnished decal sheet
Excitation supplies of 10 Volt DC @ 120mA, maximum of +24 Volt @ 50mA (user selectable) standard on Strain Gauge and Process Models

Back to top

Site Designed and Maintained by J A Callan